KitchenAid Architect Series II KUDE60FX User Manual page 9

Kitchenaid architect series ii kude60fx: user guide
Hide thumbs Also See for Architect Series II KUDE60FX:
Table of Contents

Advertisement

Available languages

Available languages

OPTION SELECTIONS
OPTIONS
Sanitizes dishes and
glassware in accordance
with National Sanitation
Foundation (NSF)/ANSI
Standard 184 for
Residential Dishwashers.
Certified residential
dishwashers are not
intended for licensed food
establishments. The Sani
indicator indicates at the
end of the cycle whether
the Sani Rinse option was
successfully completed. If
the indicator does not
activate, it is probably due
to the cycle being
interrupted.
For added convenience,
use for washing a small
load of dishes in the top
rack to help keep the
kitchen continuously
clean.
Dries dishes with heat and
a fan. This option with the
use of rinse aid will provide
the best drying
performance. Plastic items
are less likely to deform
when loaded in the top
rack. Turn ProDry
off for an air dry.
Dries dishes with heat.
This option with the use of
rinse aid will provide the
best drying performance.
Plastic items are less likely
to deform when loaded in
the top rack. Turn Heat Dry
off for an air dry.
Runs the dishwasher at a
later time or during off-
peak electrical hours.
Select a wash cycle and
options. Press 4 Hour
Delay. Press START/
RESUME. Close the door
firmly.
NOTE: Anytime the door is
opened (such as, to add a
dish), the START/RESUME
button must be pressed
again to resume the delay
countdown.
CAN BE
SELECTED WITH
Heavy Duty
Normal Wash
Available with any
cycle
Cannot be used
with ProScrub
Option
Available with any
cycle except Rinse
Only
option
Available with any
cycle except Rinse
Only
Available with any
cycle
WHAT IT DOES
Increased the main
wash temperature
from 105°F (41°C)
to 130°F (54°C) and
the final rinse from
140°F (60°C) to
155°F (68°C).
Slightly faster wash
for smaller loads
®
Uses the heating
element to heat air,
plus a system of
vents and a fan that
ventilates moist air
out of the
dishwasher to
speed drying times.
ProDry
option
defaults to ON
when any cycle is
selected except for
1 Hour Wash.
Activates the
heating element at
the end of the wash
cycle to speed
drying times. Heat
Dry defaults to ON
when any cycle is
selected except for
1 Hour Wash.
Delays the start of a
.
cycle up to 4 hours
ADDED TIME TO CYCLE
TYPICAL
MAX
53
73
-7
-30
44
51
52
52
240
240
ADDED
WATER
GALLONS
(LITERS)
0 - 3.0
(0 - 11.2)
0
0
0
0
9

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents