Dishwasher Features - KitchenAid Architect Series II KUDE60FX User Manual

Kitchenaid architect series ii kude60fx: user guide
Hide thumbs Also See for Architect Series II KUDE60FX:
Table of Contents

Advertisement

Available languages

Available languages

Canceling A Cycle
1. Open the door slightly to stop the cycle. Wait for the spraying
action to stop before completely opening the door.
2. Press CANCEL/DRAIN button once. The Cancel/Drain light will
light up.
3. Close the door and the dishwasher starts a drain cycle (if water
remains in bottom of dishwasher). Let the dishwasher drain
completely. The Cancel/Drain light turns off after 2 minutes.
Changing A Cycle After Dishwasher Is Started
1. You can interrupt a cycle and restart your dishwasher from the
beginning using the following procedure.
2. Open the door slightly to stop the cycle. Wait for the spraying
action to stop, then open the door completely.
3. Check that detergent dispenser cover is still closed. If cover is
open, you will need to refill the detergent dispenser before
restarting your new cycle.
4. Press CANCEL/DRAIN twice to reset the control.
ProScrub
Option Wash Area
®
The ProScrub
®
option wash area is located at the back of the lower
level rack.
Back of
dishwasher
NOTE: You must select the ProScrub
Make sure items do not interfere with the water feed tube, spray
arms, or ProScrub
®
spray jets.
Keep the last tine row in the back of the lower rack in the 60°
angled position when using the ProScrub
Load pans, casserole dishes, etc. in the back of the lower dish
rack with the soiled surfaces facing the ProScrub
and resting on the last row of tines in the angled position
Only one row of items may face the ProScrub
Stacking, overlapping or nesting items will keep the ProScrub
spray jets from contacting all of the surfaces.
Silverware Basket
Use the slots in the covers to
keep your silverware separated
for optimum wash. There are
specially designed slots (small
round holes) for chopsticks. Mix
silverware types to keep them
separated. Load knives down,
forks up, and alternate spoons,
for best cleaning results.

Dishwasher Features

Your KitchenAid dishwasher may have some or all of these features.
®
option to use this feature.
®
option.
®
spray jets,
®
spray jets.
5. Select new cycles and options.
6. Press START/RESUME.
Adding A Dish After Dishwasher Is Started
1. Check if Add a Dish indicator is lit. (Available on some models.
Otherwise, proceed to Step 2).
2. Open the door slightly to stop the cycle. Wait for the spraying
action to stop, then open the door completely.
3. Check whether the detergent dispenser cover is still closed. If
it is open, the wash cycle has already started and adding a
dish is not recommended.
4. If detergent has not yet been used (detergent dispenser cover
is closed), you may add a dish.
5. Press START/RESUME.
NOTE: If your silverware
does not fit into the
designated slots, flip the
covers up and push them
down into the basket.
CULINARY CADDY
Use the utensil basket to hold specialty
cooking utensils (serving spoons,
spatulas, and similar items), or overflow
silverware items.
The basket hangs on the bottom rack in
the right-hand corner. Load the basket
while it is on the bottom rack or remove
the basket for loading on a counter or
table.
NOTE: Spin the spray arms. Be sure
items in the basket do not stop the
rotation of the spray arms.
®
SURE-HOLD
.
Fold down the extra shelf on the left-hand or right-hand side of the
mid level rack to hold additional cups, stemware or long items such
as utensils and spatulas.
®
NOTE: Remove the culinary tool basket(s) when washing tall
stemware or other tall items in the top rack.
®
Utensil Basket
Cup and Stemware Holder
11

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents