Table of Contents
Advertisement
Software Procedures
d.
Select the appropriate number of screens.
e.
Select the correct monitor orientation (side by side or left/right). A set of icons will display
showing the number of monitors and their respective orientation. The monitor layout is self
explanatory. A 4A will have the 4x1 configuration depicted with 4 portrait monitors across by
1 monitor high.
f.
Select (check on) Pedestal.
g.
Ensure that Sync on Green and Composite Sync are NOT checked.
h.
Ensure that Disabled Direct Draw and Disable Red & Blue are NOT checked.
i.
Click OK to make the changes permanent.
j.
Click OK to test the new settings.
k.
Click OK to accept the new settings or wait 15 seconds and OK will be selected
automatically.
l.
Click Yes to reboot the workstation.
17.
The VGA service monitor is no longer required and may be powered off and removed from the
workstation.
SW 004 (A+,A,B) Dome Video Board Driver Installation
Page 196
Advertisement
Table of Contents
Troubleshooting
