Installation - Kenwood SIRIUS KTC-SR901 Instruction Manual

Installation

■ Mounting the Sirius Satellite radio tuner Unit
2CAUTION
• Install the Sirius satellite radio tuner unit
in a well-ventilated location and do not
place objects on top of it.
• The Sirius satellite radio tuner unit is
equipped with a cooling fan to lower the
internal temperature. Do not block the holes
of the cooling fan at the time of installation.
Blocking the holes of the cooling fan will
cease to allow the temperature to be
lowered and will cause breakdown.
• When installing to the car, the unit should
be securely fastened at a location that will
not interfere with driving.
• Installation using the self-tapping screws
• Installation using the velcro tapes
2CAUTION
Please do not install the unit near the dashboard, the rear tray, or other
important components. Doing so could lead to injury or accident should
the unit come off due to a shock and strike a person or an important
component.
Tapping screws should be used for mounting. (Attachment with velcro
strips, although easy, can come off with a shock.)
-
10
English
Accessory4 (Ø5 × 20 mm)
Accessory2
Board etc.
thickness: 20 mm or more
Carpet
• When making a hole in the chassis, check
that the gas tank, break pipe, wire
harness, or other part is not located on
the other side, and be careful not to cause
scratches.
• When attaching the mounting fittings
(Accessory2) to the Sirius satellite radio
tuner unit, use only the supplied mounting
screws (Accessory3) (M4 x 8 mm). Use
of screws other than those supplied may
result in internal damage or insecure
mounting and is very dangerous.
Accessory3
(M4 × 8 mm)
Carpet
Accessory6