Usb Data Cable; Call; Phone - Nokia 7500 Prism Manual

USB data cable

You can use the USB data cable to transfer data between
the device and a compatible PC or a printer supporting
PictBridge. You can also use the USB data cable with Nokia
PC Suite.
To activate the device for data transfer or image printing,
connect the data cable. Confirm
connected. Select mode." and select from the following
options:
Nokia mode — to use the cable for PC Suite
●
Printing & media
●
PictBridge compatible printer or with your compatible
PC
Data storage — to connect to a PC that does not have
●
Nokia software and use the device as a data storage
device
To change the USB mode, select
Connectivity USB data cable
>
mode.

Call

Select Menu Settings
>
options:
Call divert — to divert your incoming calls (network
●
service). You may not be able to divert your calls if some
call barring functions are active. See
"Security," p. 42.
Voice clarity — Select
●
intelligibility especially in noisy environments.
40
"USB data cable
— to use the device with a
Menu Settings
>
and the desired USB
Call and from the following
>
Active to enhance speech
Anykey answer
●
call by briefly pressing any key, except the power key,
the left and right selection keys, or the end key.
Automatic redial
●
of 10 attempts to connect the call after an unsuccessful
call attempt.
Speed dialling
●
phone numbers assigned to the number keys 2 to 9 by
pressing and holding the corresponding number key.
Call waiting — Select
●
notify you of an incoming call while you have a call in
progress (network service). See "Answer or reject a
call," p. 20.
Summary after call
●
approximate duration after each call.
Send my caller ID
●
number to the person you are calling (network service).
To use the setting agreed upon with your service
provider, select
>
Outgoing call line
●
for making calls if supported by your SIM card (network
service)

Phone

Select Menu Settings
>
following options:
Language settings
●
your device, select
selects the language according to the information on
the SIM card. To select the USIM card language, select
SIM language. To set a language for the voice
playback, select
voice dialing," p. 20.
— Select On to answer an incoming
— Select On to make a maximum
— Select On to dial the names and
Activate to have the network
— Select On to briefly display the
— Select Yes to show your phone
Set by network.
— to select the phone line 1 or 2
Phone and from the
>
— To set the display language of
Phone language. Automatic
Recognition lang.. See "Enhanced