Download Print this page

Specifications - Yamaha VXS10S Owner's Manual

Hide thumbs Also See for VXS10S:

Advertisement

UNPACKING
Unpack the contents and confirm that all the following items are included.
• Speaker × 1
• Bracket base × 1
• Mounting bracket × 1
• Captive washer screw × 4
• Rubber spacer × 4 (14 mm thickness)
• Hexagon bolt × 4
• Spring washer × 4
• Flat washer × 4
• Safety wire × 1
• Owner's Manual (this manual)
* Screws/bolts to fasten the bracket onto the wall and speaker cables are not included.

SPECIFICATIONS

Type
Component
Nominal impedance
Power rating
NOISE
PGM
MAX
1
Sensitivity (1W, 1m) *
2
Maximum SPL (Calculated, 1m) *
1
Frequency range (-10 dB) *
Subwoofer filter
Satellite filter
Satellite impedance
Connector
Transformer taps
70 V
100 V
Overload protection
Magnetically shielded
Enclosure
Shape
Cabinet material
Finish
Dimensions (Speaker only)
Net weight (Speaker only)
*1: Half-space (2π)
*2: Calculated based on power rating and sensitivity, exclusive of power compression.
*3: Impedance lower limit (per satellite output) VXS10S/VXS10SW: 4 Ω, VXS10ST/VXS10STW: 8 Ω
The contents of this manual apply to the latest specifications as of the printing date. Since Yamaha makes continuous improvements to the product, this manual
may not apply to the specifications of your particular product. To obtain the latest manual, access the Yamaha website then download the manual file. Since
specifications, equipment or separately sold accessories may not be the same in every locale, please check with your Yamaha dealer.
The dimensions are shown overleaf.
VXS10S/VXS10SW
Subwoofer, Bass reflex
10" (25 cm) Cone driver, Dual voice coil
8 Ω + 8 Ω
100 W + 100 W
200 W + 200 W
400 W + 400 W
96 dB SPL
125 dB SPL
45 Hz – 250 Hz
Network: Low-pass filter 6 dB/Oct, 200 Hz
Acoustic filter: Low-pass filter 6 dB/Oct, 200 Hz
Network: High-pass filter 6 dB/Oct, 200 Hz
8 Ω load per satellite output recommended *
Euroblock (4 pin) × 1:
Input (CH1: +/-, CH2: +/-)
Euroblock (4 pin) × 1: Satellite output (ST1: +/-, ST2: +/-)
Full-range power limiting to protect network and transducers
Rectangle
VXS10S/VXS10ST: Black (PVC, approximate value: Munsell N3)
VXS10SW/VXS10STW: White (PVC, approximate value: Munsell 3.5PB9.0/1)
260 × 500 × 389 mm (10.2" × 19.7" × 15.3")
16.5 kg (36.4 lb)
VXS10ST/VXS10STW
96 dB SPL
45 Hz – 250 Hz
3
Euroblock (4 pin) × 1:
Input (input: +/-, loop-thru: +/-)
Euroblock (5 pin) × 1: transformer taps
200 W, 100 W, 50 W, 25 W
200 W, 100 W, 50 W
No
MDF
19.5 kg (43.0 lb)

Advertisement

loading

This manual is also suitable for:

Vxs10swVxs10stVxs10stw