Omap35X Dvevm Software Setup For Graphics Sdk; Requirements; Preparing To Install - Texas Instruments OMAP35 Series Getting Started Manual

Document
Document Number

2 OMAP35x DVEVM Software Setup for Graphics SDK

2.1 Requirements

The following are the requirements for software setup:
PC Linux Host
•
Root login or liberal sudo privileges
o
Most Linux Distributions should work with this Graphics SDK
o
This Graphics SDK has been tested on
o
Linux Support Package for OMAP35x EVM – This graphics SDK package has been built and
•
tested with OMAP35x_SDK_v1.0.2

2.2 Preparing to Install

Download the following installers to the temp folder /tmp from the OMAP3 software update site as
mentioned in Section 1.4
OMAP35x_SDK_setuplinux_#_#_#.bin
•
OMAP35x_Graphics_SDK_setuplinux_#_##_##_##.bin
•
The # refers to the version numbers
The OMAP35x Graphics SDK contains the pre-built graphics drivers and kernel modules that are already
built with the appropriate version of the OMAP35x_SDK_setuplinux_#_#_#.bin. Make sure that this
dependency is maintained and the user uses the kernel image built from the correct version of the
OMAP35x SDK as mentioned in Section 2.1
Ensure all the .bin files are set with executable permissions.
host $ chmod 777 *.bin
OMAP35x Graphics SDK Getting Started Guide
SPRUFZ8
Red Hat Enterprise Linux, Workstation V4, x86 32 bit
Rev
Date
11
1.2
Feb 2, 2009