Installation Area; Unpacking The Washing Machine; Installation Of The Cabinet Base Cover - Toshiba AW-DUK1300K Series Owner's Manual

INSTALLATION

Installation Area

Warning!
• Stability is important to prevent the product
from moving!
• Make sure that the product does not stand on
the power cord.
Before installing the machine, the location characterized
as follows shall be selected:
1.Rigid, dry, and level surface
2.Avoid direct sunlight
3.Sufficient ventilation
4.Room temperature is above 0 C
5.Keep far away from fuel sources such as coal or gas

Unpacking The Washing Machine

Warning!
• Packaging material (e.g. Films, Styrofoam) can
• There is a risk of suffocation ! Keep all packaging
children.
1. Remove the cardboard box and styrofoam packing.
2. Lift the washing machine and remove the base packing.
3. Remove the tape securing the power supply cord and
drain hose.
4. Pick up the inlet hose from the drum.

Installation of the cabinet base cover

Running the machine or washing while placing on
the bottom foam is strictly forbidden
Lay the washing machine backward on the soft fabric .
Then Insert the cabinet base cover into washing machine
base trough, push into the end and tighten screw at one
position.
be dangerous for children.
materials
9
w
w
W> 20mm
well away from
Cabinet
base cover
Soft fabric