Table of Contents
Advertisement
11 CHILD LOCK FUNCTION
The child lock button is used to lock the screen.
Lock: press the child lock button for 1.5 seconds to lock the
screen. In the locked state, the child lock icon
on the display screen, and the child lock button is highlighted;
At this point, if you touch other buttons, the
prompting the locked state.
Unlock: In the locked state, press the child lock button for 1.5
seconds to unlock. After unlocking, the child lock button turns off
(30% brightness), and the child lock icon
either on the display screen.
12 MEMORY FUNCTION
12.1 Mode Storage
After the function stops work, the time digital tube 88:88 displays
End. Without touching other buttons, touch the memory button
to store the parameters such as the current baking mode,
the operating time and the temperature. At this point the
temperature digital tube shows C1.C2.C3.C4 (rear alignment),
and tentatively up to 4 programs can be stored. It automatically
displays the serial numbers, and replacing the earliest one
when exceeded. Assuming that no content is currently stored in
C1.C2.C3.C4, a invalid sound is given when the start button is
touched.
During the storage process, long pressing the memory button
will flicker. After the flickering is completed, the storage has
been completed, requiring the display screen to exit the display
and return to the standby state.
12.2 Memory Recall
In the standby interface, after a short pressing
memorized menu (default display C1) can be recalled, and the
number can be changed by the adjustment button
the start
is pressed, the
brightness), and the screen works according to the contents
of the memory based on the stored time and temperature until
work is done.
13 TEMPERATURE VIEW FUNCTION
After all the modes start operation, during the process of heating
up, the temperature can be viewed by pressing the temperature
button for a short time. The upper digital tube displays the current
probe temperature value in real time, and returns to the display
of set temperature value after 3 seconds. After the temperature
holding process begins, you cannot view the real-time temperature,
i.e. pressing the temperature button is invalid, or pressing the
temperature button shows only the set temperature value.
lights up
button flickers,
does not light up
, the
; when
button lamp turns off (30%
11
1.5
(30%
12
12.1
存储过程中长按记忆键闪烁，闪烁完成后代表存储已完成，显示屏
退出显示返回到待机状态。
12.2
C1 ,
(30%
)
13
-16-
1.5
)
88:88
End
C1.C2.C3.C4
4
C1.C2.C3.C4
1368274-T01-A
3
Advertisement
Table of Contents
