Kohler K-23708T-NA User Manual page 10

already shown the alarm time. At this point, touching the alarm
button again will directly cancel the current alarm setting.
2. After setting the alarm time, the oven enters the baking
process. The time digital tube only displays the baking
time but not the alarm time. When the alarm countdown
is over, the buzzer rings with 2 beeps in 1 second every
other 1 second, and the buzzer stops automatically after
10 seconds. The alarm icon disappears from the display
screen, and the alarm button icon light does not turn on. If
the buzzer is cancelled during the buzzing process, it can be
cancelled by touching the alarm button .
3. After setting the alarm time, the oven is in the standby mode.
The time digital tube displays the alarm time and counts
down. When the alarm countdown is over, the buzzer rings
with 2 beeps in 1 second every other 1 second, and the
buzzer stops automatically after 10 seconds. The alarm icon
disappears from the display screen, the alarm button icon
light does not turn on, and the time digital tube goes back to
the clock display.
7.1.3 Set Baking Time (00:00-10:00 h)
The baking mode should be selected before setting the baking time.
The default baking time for each mode is 02:00 hour. After touching
the time button , the corresponding button lamp lights up, the
baking time icon flickers on the display screen, the time digital
tube is highlighted 02:00, and starts to flicker. Set as follows: (if no
setting is made within 3 seconds, it will no longer flicker.)
1. Touch the adjustment button
Only the minute digit needs adjustment. When the increment
reaches 60 minutes, the hour digit advances 1, with display
status being 9: 59 h. It is countdown mode.
2. Touch to start operation. If additional parameters need
to be set at this point, this setting takes effect by default.
3. Incremental method:
When short pressing, the minute digit increment is 1; when
long pressing for 2 seconds, the minute digit increment is
5; when long pressing for over 5 seconds, the hour digit
increment is 1.
Note: if the default time is used, the icon
Only after the user touched the time button to adjust the time,
this time icon will appear on the display screen.
7.1.4 Reserve Function (automatic function
for setting the end time) (00: 00-23: 59)
After setting the baking time, touch
flickers on the display screen, the time digital tube displays
by default (the current clock time + the baking time), and starts
to flicker. Set as follows: (if no setting is made within 3 seconds,
it will no longer flicker.)
1368274-T01-A
to set the baking time.
does not turn on.
again. The end time icon
-9-
2.
1 2
3.
2 1
7.1.3
02:00 ,
1.
60
2.
3.
1
7.1.4
00:00-23:59
1 10
10
00:00-10:00
02:00
3
1 9:59h
2
1
+
3
1
5 5