GT SETUP TOOL FOR ANDROID:
Step 1
Tap UPLOAD SETTING
BY NFC.
Step 4
Hold the Android device to the target station
to upload the settings.
Step 6
A confirmation message will appear on the Android
device if the upload was successful.
UPLOADING SETTINGS
Step 2
Select the file to upload, tap the
appropriate authorization level, then
tap OK.
Step 3
Enter the appropriate passcode
(default: Admin *1111, Manager #2222).
Ensure that Upload Unit Link-ID settings is
checked, then tap OK.
Step 5
The settings will begin to upload to the
Android device. Continue holding device to
station until complete.
13