Advanced Settings - Viessmann VITOTRON 100 Installation And Service Instructions Manual

Vitotron 100 Electric Space Heating Hot Water Heater Installation/Service

Advanced Settings

Parameters Indicator/display
1
2
3
4
5
6
7
8
Outdoor compensation
Status/value
4-14
A/n
1, 2, 3
psi off/on
30-70
°F
off
1-9
0
+
-9 9
For advanced settings switch the control panel to stand-by
mode. First press and hold power button
and release. Then press and hold the
immediately press the power button
To select parameter press:
enable you to change the values.
Press and hold the power button
settings.
Space heating water heater power - enter the power amount (kW)
as indicated on identification label.
This value is factory preset.
Working mode of pump – PA = (automatic), Pn (manual –
continuous duty of pump).
Maximum quantity of active heating elements.
Installation pressure control
Outside temperature above which space heating water heater will
not heat, in case of space heating water heater's failure or lack of
outside temperature sensor, function is not active
Function not active
Selection of heating curves (see diagram "Outdoor compensation")
Manual setting of outlet temperature
Offset of heating curve characteristic [°F]
(see diagram "Offset for outdoor compensation")
Space heating water heater working time counter in hours
Offset for outdoor compensation
Instructions for the User
for 3 seconds
button, and
.
, , or buttons to
to exit and save the
Details
17