Sullair TSR32 User Manual page 38

TSR32 USER MANUAL R00
5.2 MACHINE MODEL
SELECTION & SUPERVISOR
38
Model: TSR32_200L (100 PSIG)
TSR32_200H (125 PSIG)
TSR32_200HH (150 PSIG)
TSR32_200XH (175 PSIG)
TSR32_250L (100 PSIG)
TSR32_250H (125 PSIG)
TSR32_250HH (150 PSIG)
TSR32_250XH (175 PSIG)
TSR32_300L (100 PSIG)
TSR32_300H (125 PSIG)
TSR32_300HH (150 PSIG)
TSR32_300XH (175 PSIG)
Cooling: Air
Press Trans: 250PSI
P1 Max: Maximum discharge pressure
KT Fluid: No
Water Switch: No
Oil Switch: No
Aux Overload: Yes
Min. Load PSI: Minimum acceptable load P1 pressure setting.
to 20 seconds
K8 Option: Disabled
Stop Timer: Time to run machine before stopping
Load Hours: Hours machine was running and loaded
Run Hours: Hours machine was running loaded and unloaded
Load Cycles: Number of load/unload cycles
Starts: Number of machine starts
Capacity: Maximum capacity of machine
Spiral Valve: Yes
VSD: Serial
Com Module: No
Mtr Module: No
The TSR32 VSD design can be setup in a variety of
horsepowers and pressures.
under the Factory Setup menu on the Supervisor
The following values
configuration.
SECTION 5
This can be done
reflect the machine