Changing Printer Paper; Installing An Sd/Sdhc Memory Card - Casio V-R100 User Manual

Standard style

Hide thumbs Also See for V-R100:

Table of Contents

Changing Printer Paper

When only about one meter of printer paper is remaining, a red line will appear . Change to a new roll

of paper at your earliest convenience .

Steps

1 . Remove the printer cover. Put your finger on the paper holder

and lift it up, then open the arm to the position where it stops

naturally .

2 . Remove the core of the printer roll in the paper compartment .

Refer to the procedure after step 2 of Loading Printer Paper

(page 12) to load a new roll of paper .

Steps

1 . Remove the side cover on the side of the main

display . It comes off easily when you insert

your finger in the depression and pull it up.

3 . Insert an SD/SDHC memory card with its top

surface facing the display .

2 . Unscrew the screws holding the card cover to

remove it .

4 . Secure the card cover with screws and then

attach the side cover .

Table of Contents