Introduction - Emerson COPELAND H Series User Manual

Introduction

Thank you for purchasing the Emerson™ H-Series Condensing Unit. We hope
that this product meets your intended refrigeration requirement. Please read
through this operation manual to familiarize yourself with the installation, com-
missioning, and operation of this product. Please do read the following informa-
tion in this page before proceeding with the rest of the manual.
The Emerson™ H-Series scroll refrigeration condensing units should only be
installed by suitably qualified and experienced refrigeration technicians.
No responsibility can be accepted for damage caused by inexperienced or inade-
quately trained site technicians or improper system design. All instructions and
procedures described in this manual are based on good refrigeration trade prac-
tices as applicable to this particular product. The installation contractor may
prefer to use variations to these recommendations. However, the methods
described in this manual represent the minimum requirements to avoid any sub-
sequent warranty claims for this equipment and its components. These instruc-
tions do not cover the fundamentals of good electrical or refrigeration practice
and are therefore intended for use only by qualified and/or experienced person-
nel or technicians.
For any additional query, please consult your local sales office, quoting unit
model and serial number as shown on the nameplate. In case of ambiguity, the
wiring diagram supplied with each unit takes precedence over the diagram in this
manual.
Emerson H-Series Condensing Units are fitted with high efficient Copeland Scroll
Compressor and the Dual Temperature Condensing Units are fitted with high
efficient ZFI Copeland Scroll compressors with vapor injection technology.
This document is designed to help the contractor and customer for the installa-
tion, commissioning & operation of Emerson's H-Series Condensing Unit.
3