Bosch SmartGrow Life MSGP3L CN Series Information For Use page 33

Accessory
Height module MSGZHB1L
Boosting light
module
Blooming light
module
Microgreen
tray
Wall mount
set
Design sleeve MSGZDS2L,
Designation
MSGZHB2L
MSGZHB3L
MSGZMTL
MSGZWML
MSGZDS3L
Use
Insert another height module when the plants
have almost reached the light unit. You can in-
sert up to 4 height modules.
For an additional portion of light. This way,
your plants grow faster and can be harvested
earlier.
Tip: For perfect results, up to two boosting or
blooming light modules can be used altern-
ately to match the height modules.
The special light for blooming. For maximum
blooming and richer harvesting.
Tip: For perfect results, up to two boosting or
blooming light modules can be used altern-
ately to match the height modules.
Plant 2 different microgreens at the same
time.
¡ Add 1 spoonful (2 g) of nutrients to
1.5 litres of fresh tap water and pour into
the water bowl.
¡ Fit the anti-spill ring, the watering tray and
the microgreen tray.
¡ Place the contents of one microgreen seed
bag in each of the microgreen sections. Fit
the microgreen cover.
¡ Place the light unit on the docking unit and
insert the power supply. The light unit lights
up pink and the sprouting phase begins.
¡ If the microgreens have sprouted after
2-4 days, remove the microgreen cover and
insert a height module if necessary. The mi-
crogreens will be ready for harvesting after
around 7 days.
Use the wall mount set to fix the SmartGrow
to a wall.
Choose between different coloured design
sleeves and pull the design sleeve over the
water bowl. Store the nutrients and the spoon
in the stow-away pocket of the design sleeve.
Accessories en
33