To change the start time of stand-
1.
ard mode, wait until the time you
require.
To end sleep mode, touch the
2.
touch button for 3 seconds until
the light unit flashes twice.
a The lighting will switch on.
a The device starts the 16-hour
standard mode.
a The start time for standard mode is
saved and is retained until it is
changed again.
6.7 Dimming or switching off
the lighting temporarily
To dim the lighting, touch the
1.
touch button briefly.
Dimmed lighting ends automatic-
ally after 2 hours.
To switch the lighting off, touch the
2.
touch button briefly again.
To switch the lighting back on,
3.
touch the touch button briefly
again.
Notes
¡ The lighting will automatically
switch on again once the next
sleep mode phase comes to an
end.
¡ Repeatedly dimming or switching
off the lighting on a daily basis
may adversely affect growth of the
plants.
6.8 Starting holiday mode
When in holiday mode, plants grow
more slowly and use less nutrient
solution.
Requirements
¡ At least one height module has
been inserted.
¡ The nutrient solution is filled up to
the marking
→ "Topping up with nutrient solu-
tion", Page 27
Touch the touch button for
▶
10 seconds until the light unit
lights up pink.
a The device is in holiday mode.
Note: To end holiday mode, touch
the touch button briefly.
operation en
.
29