Basic Operations - Kenwood KDC-148 Instruction Manual

Basic operations

Remote sensor
Do not expose to bright sunlight.
Volume knob
Detaches the faceplate
The following indicator lights up when...
ST: A stereo broadcast is received (FM).
IN: A disc is in the unit.
Maintenance
Cleaning the unit: Wipe off the dirt on the panel with a dry silicon or soft cloth. Failure to
observe this precaution may result in damage to the monitor or unit.
Cleaning the connector: Wipe off dirt on the connector of the unit and faceplate. Use a
cotton swab or cloth.
Handling discs
Do not touch the recording surface of the disc.
Do not stick tape etc. on the disc, or use a disc with tape stuck on it.
Do not use any accessories for the disc.
Clean from the center of the disc and move outward.
Clean the disc with a dry silicon or soft cloth. Do not use any solvents.
When removing discs from this unit, pull them out horizontally.
Remove the rims from the center hole and disc edge before inserting a disc.
4
Loading slot
Display window
Ejects the disc
Auxiliary input jack