Bass Management System); B.m.s. Frequency Offset; Receive Mode Setting; Crsc (Clean Reception System Circuit) - Kenwood Ez900HDS Instruction Manual

Menu system
B.M.S. (Bass Management System)
Adjust the bass boost level of the external
amplifier using the main unit.
Display Setting
"AMP Bass FLT" Bass boost level is flat.
"AMP Bass +6" Bass boost level is low (+6dB).
"AMP Bass +12" Bass boost level is mid (+12dB).
"AMP Bass +18" Bass boost level is high (+18dB).
• Refer to the catalog or instruction manual for power
amplifiers that can be controlled from this unit.
• For amplifiers there are the model that can be set
from Flat to +18 dB, and the model that can be set
from Flat to +12 dB.
When an amplifier that can only be set to +12 is
connected to the unit, "AMP Bass +18" won't work
correctly even if it's selected.

B.M.S. Frequency Offset

Setting the central frequency boosted by B.M.S.
Display Setting
"AMP Freq NML" Boost with the normal central frequency.
"AMP Freq Low" Drop the normal central frequency 20%.
In HD Radio mode

Receive mode Setting

Sets the receive mode.
1
Select the Receive mode
Press the [AUDIO] knob.
Select the "Receive Mode" display.
• This function can be used the [FM] / [AM] button.
2
Enter Receive mode
Press the [MENU] button.
3
Set the Receive mode
Press the [AUDIO] knob.
Each time the knob is pressed the Receive mode
switches as shown below.
30
|
English
Receive mode Display
Auto mode "Auto"
Digital "Digital"
Analog "Analog"
• This function can be used the [FM] / [AM] button.
4
Exit Receive mode
Press the [MENU] button.
• Even if the "Auto" setting, an analog broadcast will be
received during the reception of a ball game mode
(non-delayed broadcast program).
In FM reception (Ez700SR)
In HD Radio (FM) mode (Ez900HDS)
CRSC (Clean Reception System
Circuit)
Temporarily have reception switched from
stereo to mono to reduce multi-path noise when
listening to the FM station.
Display
"CRSC ON"
"CRSC OFF"
• Strong electrical fields (such as from power lines) may
cause unstable sound quality when CRSC is turned
ON. In such a situation, turn it OFF.
Operation
Analog broadcasts and digital
broadcasts will be switched
automatically.
When both are being transmitted,
the digital broadcast will have
priority.
Digital broadcasts only.
Analog broadcasts only.
Setting
The CRSC is ON.
The CRSC is OFF.