Installing The Escutcheon - Kenwood DPX-302 Instruction Manual

Installing the Escutcheon

For General Motors
1
Refer to the section <Removing the
Hard Rubber Frame> (page 28) and
then remove the hard rubber frame.
Cut out accessory 2 to meet the
2
shape of the opening of the center
console.
Attach accessory 2 to the unit.
3
For TOYOTA/ SCION
1
Refer to the section <Removing
the Hard Rubber Frame> (page 28)
and then remove the hard rubber
frame.
Cut out accessory 2 as illustrated.
2
⁄
• When cutting out accessory 2, make
sure it fits the opening of the center
console.
3
Fold double-sided adhesive
(accessory 3) along the slit and
attach it to accessory 2 cut-out
against the center rib as illustrated.
Use 2 pieces of accessory 3 for 1
accessory 2 cut-out.
Attach accessory 2 cut-out to the
4
unit.
26
|
English
Accessory3
Cut out to meet the shape of the
opening in the vehicle.
Accessory2
Cutting line
Accessory2