Basic Operations; Adjusting The Tone; Adjusting The Balance - Clarion PROAUDIO DRX7575Z Owner's Manual

When you have entered a title in a CD, it ap-
pears in the sub display. If you have not en-
tered a title, "NO-TTL" appears in the title dis-
play instead. For information on how to enter a
title, refer to the subsection "Entering titles"
in the "Other Handy Functions".
Setting the Z-enhancer
This unit comes with 3 types of sound tone effects
stored in memory. Select the one you prefer.
The factory default setting is "Z-EHCR OFF".
Each time you press Z-EHCR button 8, the tone
effect changes in the following order:
"Z-ENHANCER 1"
ENHANCER 3"
ENHANCER 1"...
• Z-ENHANCER 1: bass emphasized
• Z-ENHANCER 2: treble emphasized
• Z-ENHANCER 3: bass and treble emphasized
• Z-EHCR OFF : no sound effect

Adjusting the tone

Press A-M button $ and select the item to adjust.
Each time you press A-M button $, the item
changes in the following order:
When the Z-enhancer and tone bypass are off
"T-BYPASS" "BASS"
"BALANCE" "FADER"
When Z-enhancer 1, 2 or 3 is set
"Z-EHCR" "BALANCE"
Function mode...
Setting tone bypass
The tone bypass disables the tone (bass and
treble) functions and cuts the noise generated
when the tone functions are on.
1. Press A-M button $ and select "T-BYPASS".
2. Turning the Rotary knob & clockwise sets the
tone bypass to "YES" (ON); turning it
counterclockwise sets the tone bypass to
"NO" (OFF).
The factory default setting is "NO" (OFF).
If the setting is "YES" (ON), the bass and treble
adjustments cannot be made.
3. When the adjustment is complete, press A-M
button $ several times until the function mode
is reached.
Note:
• If you set the Z-ENHANCER function to ON (1 to
3), you cannot set the tone bypass.
"Z-ENHANCER 2"
"Z-EHCR OFF"
"TREBLE"
Function mode...
"FADER"
Adjusting the bass
1. Press A-M button $ and select "BASS".
2. Turning the Rotary knob & clockwise empha-
sizes the bass; turning it counterclockwise
attenuates the bass.
The factory default setting is "0". (Adjustment
range: –6 to +6)
The bass cannot be adjusted if the tone by-
pass setting is "YES" (ON).
3. When the adjustment is complete, press A-M
button $ several times until the function mode
is reached.
"Z-
Adjusting the treble
"Z-
1. Press A-M button $ and select "TREBLE".
2. Turning the Rotary knob & clockwise empha-
sizes the treble; turning it counterclockwise
attenuates the treble.
The factory default setting is "0". (Adjustment
range: –6 to +6)
The treble cannot be adjusted if the tone by-
pass setting is "YES" (ON).
3. When the adjustment is complete, press A-M
button $ several times until the function mode
is reached.

Adjusting the balance

1. Press A-M button $ and select "BALANCE".
2. Turning the Rotary knob & clockwise empha-
sizes the sound from the right speaker; turn-
ing it counterclockwise emphasizes the sound
from the left speaker.
The factory default setting is "0". (Adjustment
range: L13 to R13)
3. When the adjustment is complete, press A-M
button $ several times until the function mode
is reached.
Adjusting the fader
1. Press A-M button $ and select "FADER".
2. Turning the Rotary knob & clockwise empha-
sizes the sound from the front speakers; turn-
ing it counterclockwise emphasizes the sound
from the rear speakers.
The factory default setting is "0". (Adjustment
range: F12 to R12)
3. When the adjustment is complete, press A-M
button $ several times until the function mode
is reached.

Basic Operations

11
DRX7575z