Table of Contents
Advertisement
3-3
Advanced
Main
OnBoard LAN Controller
Power Loading
Soft-Off by PWR-BTTN
Primary Display
ErP
` Trusted Computing
` IT8686 Super IO Configuration
` Hardware Monitor
` SIO Misc Functions
` CPU Configuration
` USB Configuration
` APP Center Download & Install Configuration
` Network Stack Configuration
` CSM Configuration
` NVMe Configuration
` Platform Trust Technology
` SATA Controller Configuration
` Realtek PCIe GBE Family Controller
` Security Configuration
& OnBoard LAN Controller
Enables or disables the onboard LAN function. (Default: Enabled)
If you wish to install a 3rd party add-in network card instead of using the onboard LAN, set this item to
Disabled.
& Power Loading
Enables or disables dummy load. When the power supply is at low load, a self-protection will activate causing
it to shutdown or fail. If this occurs, please set to Enabled. Auto lets the BIOS automatically configure this
setting. (Default: Auto)
& Soft-Off by PWR-BTTN
Configures the way to turn off the computer in MS-DOS mode using the power button.
Instant-Off
Delay 4 Sec.
& Primary Display
Specifies the first initiation of the monitor display from the installed PCI graphics card or the onboard
graphics.
IGD
PCI
& ErP
Determines whether to let the system consume least power in S5 (shutdown) state. (Default: Disabled)
Note: When this item is set to Enabled, the following functions will become unavailable: Resume by Alarm,
power on by mouse, and power on by keyboard.
` Trusted Computing
Enables or disables Trusted Platform Module (TPM).
Aptio Setup Utility - Copyright (C) 2022 American Megatrends, Inc.
Advanced
Security
Boot
[Enabled]
[Auto]
[Instant-off]
[IGD]
[Disabled]
Version 2.19.1268. Copyright (C) 2022 American Megatrends, Inc.
Press the power button and then the system will be turned off instantly. (Default)
Press and hold the power button for 4 seconds to turn off the system. If the power
button is pressed for less than 4 seconds, the system will enter suspend mode.
Sets the onboard graphics as the first display. (Default)
Sets the graphics card on the PCIe Slot as the first display.
Save & Exit
gf: Select Screen
hi: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
- 21 -
Advertisement
Table of Contents
