Before Use; General Safety Instructions - Black & Decker CT6 Instruction Manual

Before using the compressor, read the instructions for use
carefully and comply with the following safety precautions.
Consult this handbook if you have any doubts regarding
functioning.
Preserve all the documentation so that anyone who uses
the compressor can consult this beforehand.
PRESERVE THIS HANDBOOK
FOR FUTURE REFERENCE
Warning! Read and understand all instructions. Failure
to follow all instructions listed below, may result in electric
shock, fire and/or serious personal injury.
SAVE THESE INSTRUCTIONS
SAFETY INSTRUCTIONS
An Acoustic Pressure value of 4m. corresponds
to the Acoustic Power value stated on the label
located on the compressor, minus 20 dB.

1. BEFORE USE

The compressor must be used in a suitable
environment (well ventilated with an ambient
temperature of between +5°C and +40°C) and
never in places affected by dust, acids, vapors,
explosive or flammable gases.
f Always maintain a safety distance of at least 4m
between the compressor and the work area.
f Any coloring of the belt guards of the compressor
during painting operations indicates that the distance
is too short.
f Insert the plug of the electric cable in a socket
of suitable shape, voltage and frequency complying
with current regulations.
f Use extension cables with a maximum length
of 5m and of suitable cross-section.
f The use of extension cables of different length
and also of adapters and multiple sockets
should be avoided.
f Always use the switch of the pressure switch
to switch off the compressor.
f Always use the handle to move the compressor.
f Always disconnect power cord and air hose from
the air compressor before transporting.
f When operating, the compressor must be placed on
a stable, horizontal surface to guarantee correct
lubrication.

GENERAL SAFETY INSTRUCTIONS

f Never direct the jet of air towards persons, animals
or your body. (Always wear safety goggles to protect
your eyes against flying objects that may be lifted
IMPORTANT by the jet of air).
f Never direct the jet of liquids sprayed by tools
connected to the compressor towards
the compressor.
f Never use the appliance with bare feet or wet hands
or feet.
f Never pull the power cable to disconnect the plug from
the socket or to move the compressor.
f Never leave the appliance exposed to adverse
weather conditions.
f Never transport the compressor with the receiver
under pressure.
f Do not weld or machine the receiver. In the case of
faults or rusting, replace the entire receiver.
f Never allow inexpert persons to use the compressor.
Keep children and animals at a distance from the
work area.
f This appliance is not intended for use by persons
(including children) with reduced physical, sensory
or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision
or instruction concerning the use of the appliance by
a person responsible for their safety.
f Children should be supervised to ensure that they do
not play with the appliance.
f Do not position flammable or nylon/fabric objects
closed to and/or on the compressor.
f Never clean the compressor with flammable liquids
or solvents. Check that you have unplugged
the compressor and clean with a damp cloth only.
f The compressor must be used only for air
compression. Do not use the compressor for any
other type of gas.
f The compressed air produced by the compressor
cannot not be used for pharmaceutical, food or
medical purposes except after particular treatments
and cannot be used to fill the air bottles of scuba divers.
f To avoid serious burns, never touch the cylinder head
parts or tubing during or immediately after operation.
LABELS ON TOOL
The label on your tool may include the following symbols:
Before use, read the handbook carefully.
Warning, hot surfaces.
Dangerous voltage.
ENGLISH • 13