Specifications - Clarion FB275BTB Owner's Manual

11. SPECIFICATIONS

FM tuner
Frequency Range: 87.5 MHz to 107.9 MHz
Usable Sensitivity: 11 dBf
50 dB Quieting Sensitivity: 17 dBf
Alternate Channel Selectivity: 75 dB
Stereo Separation ( 1 kHz ) : 35 dB
Frequency Response ( ± 3 dB ) : 30 Hz to 15 kHz
SD player
System: Multimedia audio system
Frequency Response: 10 Hz to 20 kHz (± 3 dB )
Dynamic Range: 80 dB ( 1 kHz )
Harmonic Distortion: 0.01%
Bluetooth wireless technology
®
Compliance: Bluetooth
Frequency Range: 2.40~2.4835 GHz, ISM band
RF Power: Class 2 ( 2.5mW )
Profiles: HFP, A2DP, AVRCP
Operating Temperature: -20ºC ~ 60ºC
Telephone Operation:
Noise reduction, Echo cancellation,
Full duplex telephony
Mic Input ( External ) : 2.2k ohm, 2V electret
Audio
Maximum Power Output: 200 W ( 50 W X 4 ch )
Bass Control Action ( 100 Hz ) : ±14 dB
Treble Control Action ( 10 kHz ) : ±14 dB
Line Output ( with A/C 1 kHz, 10 kΩ ) : 1.8 V
38
FB275BT / FB275BTB
1.2
®
General
Power Supply Voltage:
12 V DC ( 10.8 V to 15.6 V allowable ) , negative
ground
Current Consumption: Less than 15 A
Speaker Impedance: 4 Ω ( 4 Ω to 8 Ω allowable )
Weight: 1.87 lb. ( 0.85 kg )
Dimensions:
178 mm Width X 50 mm Height X 154 mm
Depth
Notes:
• Specifications comply with JEITA Standards.
• Specifications and design are subject to change
without notice for further improvement.
• Please make sure when connecting external power
amplifier, that you properly, to the car chassis,
ground the amplifier.
• If this is not done, severe damage to the source
unit may happen.
Power Output:
17 W RMS x 4 Channels at 4 Ω and ≤ 1%
THD+N
Signal to Noise Ratio:
87 dBA ( reference: 1 W into 4Ω )