Table of Contents
Advertisement
Figure 13. Two-post center-mount installation
2
Slide the back bracket towards the post. Secure it to the post flange with two user-supplied screws, items 2 and 3.
3
Repeat this procedure for the second rail.
Four-post threaded installation
NOTE:
For more installation instructions, see the installation labels attached to the rail assembly.
1
Remove the latch castings from each end of the ReadyRails assemblies. To remove the two screws each latch casting, use a Torx
driver.
Retain the latch castings for future rack requirements.
S4100–ON Series installation
25
Advertisement
Table of Contents
