Turning On The Headset; Wearing The Headset; Turning Off - jWIN JH-E1100 Instruction Manual

Noise Reduction In-Ear Earphones
OPERATING INSTRUCTIONS

Turning on the Headset

Insert one (1) "AAA" battery in the battery compartment as
shown below.
Once the battery is installed, slide the ANR
Switch to the ANR position to activate Active
Noise Reduction

Turning off

the Headset
To turn off the
Active Noise
Reduction, slide the
ANR switch to the
OFF position.

Wearing the Headset

These earphones are designed to be worn comfortably in the
ears. Gently place the left and right earphone in each ear as
marked (L and R).
Adjust the volume to a comfortable listening level.
V10M10_IM_EN_08272007
- 8 -
www.jWIN.com