Marantz NR1509 Service Manual page 123

1.6. Confirmation items for the video system
See the block diagram fig.VXXth.
Paths to be confirmed Display
1 Analog Video pass fig.V01
V01:VIDEO PASS
HDMI pass
2 fig.V02
V03:HDMI PASS
(MAIN ZONE)
HDMI CEC
3 (Control Monitor : fig.V03
V04:HDMI CEC
HDMI Monitor1)
HDMI Audio fig.V04a
4
V05:H.AUDIO-AVR
(Audio : AVR) fig.V04b
HDMI Audio
5 fig.V05
V06:H.AUDIO-TV
(Audio : TV)
6 GUI fig.V06
V07:GUI MENU ON
Settings
Input Source : CBL/SAT
Video Conversion (IP Scaler) : OFF, All sources
MAIN ZONE : On
Input Source : CBL/SAT
MAIN ZONE : On
Input Source : CBL/SAT
HDMI Control : On
MAIN ZONE : On
Input Source : CBL/SAT
HDMI Control : Off
HDMI Audio : AVR (if checking the audio output from
AVR)
HDMI Audio : TV (if checking the audio output from TV)・ HDMI input (PCM, DolbyDigital, DTS) ⇒ HDMI output (audio output from connected TV)
Input Source : CBL/SAT
Resolution : "AUTO", All sources
Setup Menu : On
MAIN ZONE : On
123
What to confirm
・ CVBS input ⇒ CVBS output
( b The input source can be switched to any source except CBL/SAT.)
・ HDMI input (MAIN function) ⇒ HDMI output (MAIN)
・ HDMI input (4K) ⇒ HDMI output (4K) & Vol display
( b The input source can be switched to any source except CBL/SAT.)
・ When the power supply of a TV is put in the standby mode, make sure that the power supply
of this unit is also put in the standby mode.
( b The input source can be switched to any source except CBL/SAT.)
・ The ARC path can also be checked (check this using the TV input source).
・ HDMI input (PCM, DolbyDigital, DTS) ⇒ Speaker output.
・ HDMI input (HD audio) ⇒ Speaker output.
( b The input source can be switched to any source except CBL/SAT.)
( b The input source can be switched to any source except CBL/SAT.)
・GUI display ⇒ HDMI output.
( b The input source can be switched to any source except CBL/SAT.)