Returning To The Factory Settings (Factory Reset) - Roland Aerophone GO Owner's Manual

Setting Side keys
Bite Pitch Control
Key Hold
MEMO
You can use the dedicated app to edit the settings of the Aerophone GO from your smartphone or tablet.
Ø Refer to "Using the Aerophone GO with the Smartphone" (p. 10).

Returning to the Factory Settings (Factory Reset)

Here's how to return the Aerophone GO to its factory-set state.
* Be aware that when you execute a factory reset, all previously stored settings are lost.
1 .
Turn the [Ā] switch "OFF".
2 .
While holding down both of the octave keys "UP" and "DOWN", turn the [Ā] switch "ON".
Once you hear three short beeps, the instrument enters settings mode.
The power LED blinks when the instrument is in settings mode.
3 .
Long-press the thumb button.
A long "beep" is heard, and the settings return to the factory-set state.
4 .
Turn the power off, and then on again.
This completes the factory reset.
Value
Explanation
(Bold: default)
This sets the pitch control according to how you bite the reed.
If you're using the round-style mouthpiece, turn this setting "OFF".
1 OFF Turns the pitch control (according to how you bite the reed) off.
2 Sax Relaxing your bite on the reed lowers the pitch.
C
4
3 E-Wind Apply vibrato by repeatedly relaxing and biting the reed.
Sound is produced when you blow into the mouthpiece. Select "OFF" when you're
OFF
1
playing normally.
C
2
Sound is produced just by pressing the keys, even if you don't blow into the
2 ON
mouthpiece.
Changing the Settings
9