Storing The Appliance; Troubleshooting - Salton SIMM12 Instructions And Warranty

• When cleaning, unplug the unit and remove the ice cubes. Use a diluted solution of water and
vinegar to clean the inside and the outside surface of the Ice maker.
• Clean the inside of the ice machine, including the; water reservoir, ice basket, evaporator and
water / ice shovel tray frequently.
• Do not spray the Ice maker with chemicals or diluted agents such as acids, gasoline or oil.
• Do not immerse in water.
• Should you not use the unit for a long period there may be an air block which will not allow the
pump to operate and the ADD WATER light will flash continuously.
-Ensure there is enough water in the unit and press the POWER button again - the machine
will enter normal state.
• To ensure ice is clean, please change water in water reservoir everyday. If you are not using
the machine for a long period of time, please drain the water out and clean the unit thoroughly.
• Should the compressor stop working due to lack of water or a power supply interruption, turn
the unit off for 3 minutes before switching it back on.
• Always use fresh water when using the appliance.

STORING THE APPLIANCE

• Unplug the unit from the wall outlet and clean all the parts as instructed above. Ensure that all
parts are dry before storing.
• Store the appliance in its box or in a clean, dry place.
• Never store the appliance while it is still wet or dirty.
• Never wrap the power cord around the appliance.

TROUBLESHOOTING

6