Burnham Apex APX399 Installation, Operating And Service Instructions page 96

X. Operation
G. Changing Adjustable Parameters (continued)
Contractor
Setup
"Press" button to access the following parameters:
Use Up and DOWN Arrows for More
Factory Setting
Contractor Name
Address Line 1
Address Line 2
Phone
Manual
"Press" button to access the following screen:
Control
The Manual Speed Control speed screen allows the technician to set firing rate at low or high speed for combustion testing.
"Press" "Low" to select
manual firing rate control
and Minimum firing rate %
96
i
Contractor name
Press box to input contractor information.
<
Bill Smith
Save
Press SAVE button to store revisions.
Enter Contractor Information
1 2
A B
Exit Screen without Saving
Clear Entire Field
Backspace
Save Field and Exit
range / Choices
User defined
User defined
User defined
User defined
i
Manual Speed Control
0 RPM
Status
press to change mode
Low High
"Press" "High" to select
manual firing rate control
and Central Heat
Maximum firing rate %
For Service Contact:
>
Bill Smith
3 4 5 6 7 8 7 8
ES CL
C D
BS
C R
Contractor Name
Contractor Address Line 1
Contractor Address Line 2
Contractor Phone
0%
Auto
Auto
Press "Auto"
to return
firing rate to
Automatic
Mode
Bill Smith
12 Victory Lane
Plainview, New York
516 123-4567
Example Screen
Parameter and Description
nOTE
Selecting "Low" or "High"
locks (manual mode) firing
rate at min or max Rate %.
After combustion testing select
"Auto" to return the boiler to
normal operation.