Advertisement
2. Fix the ANCHOR BOLT onto the concrete CEILING, and secure the SAFETY WIRE to the
ANCHOR BOLT as below:
❶
Tighten the nut ("N1") on the ANCHOR BOLT.
➋
Insert the provided SAFETY BRACKET into the ANCHOR BOLT.
➌
Tighten two nuts ("N2","N3") onto the ANCHOR BOLT.
➍
Hook and fix one end of the SAFETY WIRE onto the SAFETY BRACKET.
➎
Hook and fix the other end of SAFETY WIRE onto the HOUSING as shown below.
앙카볼트
ANCHOR BOLT
천장
CEILING
The ANCHOR BOLTs and nuts are optional and not included in the product package.
3. To connect to the camera, insert the external cable through the side hole on the housing
to the inside of the housing as shown in the figure.
M
천장
CEILING
Hole
SHD-3000F2-ENG-150319.indd 5
Refer to the installation manual of the camera that you want to install, and prepare necessary
cables for camera connection.
하우징
HOUSING
홀
너트(N1)
Nut (N1)
앙카볼트
ANCHOR BOLT
안전브라켓
Safety BRACKET
너트(N2,N3)
Nut (N2,N3)
안전와이어
SAFETY WIRE
천장
CEILING
하우징
HOUSING
하우징
HOUSING
외부케이블
External Cable
SHD-3000F2 _5
2015/3/19 15:09:34
Advertisement
