Advertisement

Quick Links

EN
User Manual
Washing
Machine
PTL7100P

Advertisement

Table of Contents
loading

Summary of Contents for Philco PTL7100P

  • Page 1 User Manual Washing Machine PTL7100P...
  • Page 2: Table Of Contents

    CONTENTS Safety information Before first use Safety instructions Daily use Product description Hints and tips Control panel Care and cleaning Programme Chart Technical Data Consumption values Troubleshooting Options Installation Subject to change without notice. SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions.
  • Page 3: Safety Instructions

    Do not exceed the maximum load of 7 kg (refer to the • "Programme chart" chapter). The operating water pressure at the water entry point from • the outlet connection must be between 0.5 bar (0.05 MPa) and 8 bar (0.8 MPa). The ventilation opening in the base (if applicable) must not •...
  • Page 4 Electrical connection • This appliance is for household use only. • The appliance must be earthed. • Follow the safety instructions on the • Always use a correctly installed detergent packaging. shockproof socket. • Do not put flammable products or items •...
  • Page 5: Product Description

    PRODUCT DESCRIPTION Appliance overview Control panel Lid handle Feet for levelling the appliance Rating plate CONTROL PANEL Control panel description DELAY START TEMPERATURE MINI 30 COTTON 90° 1000 COTTON JEANS 60° + PREWASH REFRESH COTTON QUICK PREWASH / WASH 20 MIN RINSE / SPIN EASY IRON SYNTHETICS...
  • Page 6: Programme Chart

    Indicators end of cycle END - The indicator comes on when the pro‐ washing phase PREWASH/WASH - gramme is completed. The indicator comes on after pressing the START/PAUSE button. This means the ap‐ pliance is operating. rinsing phase RINSE/SPIN - The indicator comes on when the appliance performs the extra rinse phase.
  • Page 7 Programme Maxi‐ Programme description Temperature range (Type of load and soil level) load Maxi‐ spin speed SPIN 7 kg To spin the laundry and to drain the water in the 1000 rpm drum. All fabrics, except woollens and delicate fabrics. EASY IRON 1 kg Synthetic items requiring a gentle wash.
  • Page 8: Consumption Values

    Programme ■ ■ ■ ■ ■ COTTON ECO SYNTHETICS ■ ■ ■ ■ ■ ■ DELICATE ■ ■ ■ ■ ■ ■ WOOL ■ ■ ■ ■ MIX 20° ■ ■ ■ ■ ■ RINSE ■ ■ ■ ■ ■ DRAIN ■...
  • Page 9: Options

    Programmes Load Energy Water Approxi‐ Remain‐ (kg) consump‐ consump‐ mate pro‐ ing mois‐ tion (kWh) tion (litre) gramme ture (%) duration (minutes) COTTON 1,16 60°C COTTON 0,61 40°C SYNTHETICS 0,45 40°C DELICATE 0,55 40°C WOOL 0,35 30°C Standard cotton programmes Standard 60°C cot‐...
  • Page 10: Before First Use

    • Set this option to deactivate all spin • The door stays locked. You must drain phases. Only the drain phase is the water to unlock the door. available. To drain the water refer to • Set this option for very delicate fabrics. "Draining water out after the •...
  • Page 11 2. Put the detergent and the fabric Always obey the instructions conditioner into the proper compartments. that you find on the packaging of the detergent products. When you set a prewash option, put the deter‐ gent for prewash phase directly into the drum. Detergent compartment for washing phase.
  • Page 12: Hints And Tips

    • The indicator of the button START/ CAUTION! If the temperature PAUSE goes off. and level of the water in the • The indicator END is on. drum are too high, you cannot • You can open the lid. open the lid. •...
  • Page 13 • Some coloured items can discolour °C max) for all types of fabric, or with the first wash. We recommend that special for woollens only. you wash them separately for the first • Do not mix different types of times. detergents.
  • Page 14: Care And Cleaning

    CARE AND CLEANING WARNING! Refer to Safety Always obey the instructions chapters. that you find on the packaging of the product. External cleaning Maintenance wash Clean the appliance with soap and warm water only. Fully dry all the surfaces. With the low temperature programmes it is possible that some detergent stays in the CAUTION! Do not use alcohol, drum.
  • Page 15 Cleaning the inlet hose and the valve filter 90˚ Frost precautions Do this procedure also when you want to do the emergency If the appliance is installed in an area drain. where the temperature can be less than 0°C, remove the remaining water from the 1.
  • Page 16: Technical Data

    3. Remove the drain hose from the rear 7. Disconnect the appliance from the support and unhook it from sink or mains socket. spigot. WARNING! Make sure that the 4. Put the ends of each drain and inlet temperature is more than 0°C hose in a container.
  • Page 17 • - The mains supply is unstable. WARNING! Deactivate the Wait until the mains supply is stable. appliance before you do the checks. • - The appliance drum doors are open or not closed correctly. Please close drum doors ! Possible failures Problem Possible solution...
  • Page 18: Installation

    Problem Possible solution There is water on the • Make sure that the couplings of the water hoses are tight and floor. there is not water leakages. • Make sure that the drain hose have no damages. • Make sure you use the correct detergent and the correct quantity of it.
  • Page 19 Unpacking...
  • Page 20 Positioning Water supply 3/4” 1/2” 3/4” 3/4” Drainage min.600 mm max.1000 mm ENVIRONMENTAL CONCERNS not dispose of appliances marked with the Recycle materials with the symbol . Put symbol with the household waste. the packaging in relevant containers to Return the product to your local recycling recycle it.
  • Page 24 192937440-A-022018...

Table of Contents