Philco PTL7100PEX User Manual
  1. Manuals
  2. Brands
  3. Philco Manuals
  4. Washer
  5. PTL7100PEX
  6. User manual

Philco PTL7100PEX User Manual

Hide thumbs Also See for PTL7100PEX:
Table of Contents

Advertisement

Quick Links

EN
User Manual
Washing
Machine
PTL7100PEX

Advertisement

Table of Contents
loading

Related Manuals for Philco PTL7100PEX

Summary of Contents for Philco PTL7100PEX

  • Page 1 User Manual Washing Machine PTL7100PEX...

  • Page 2: Table Of Contents

    CONTENTS Safety information Before first use Safety instructions Daily use Product description Hints and tips Control panel Care and cleaning Programme Chart Troubleshooting Consumption values Technical Data Options Installation Settings Subject to change without notice. SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions.

  • Page 3: Safety Instructions

    Do not exceed the maximum load of 7 kg (refer to the • "Programme chart" chapter). The operating water pressure at the water entry point from • the outlet connection must be between 0.5 bar (0.05 MPa) and 8 bar (0.8 MPa). The ventilation opening in the base (if applicable) must not •...
  • Page 4 Electrical connection • This appliance is for household use only. • The appliance must be earthed. • Follow the safety instructions on the • Always use a correctly installed detergent packaging. shockproof socket. • Do not put flammable products or items •...

  • Page 5: Product Description

    PRODUCT DESCRIPTION Appliance overview Control panel Lid handle Feet for levelling the appliance Rating plate CONTROL PANEL Control panel description TIME DELAY START MINI 30 COTTON 90° 1000 COTTON JEANS + PREWASH 60° REFRESH COTTON ECO 40° 20 MIN DOOR LOCK 30°...

  • Page 6: Programme Chart

    SPIN reduction button TEMPERATURE button Display This area shows: - Programme duration • - Programme is completed • - Delay start hours • - Alarm codes (refer to the chapter 'Troubleshooting') • - Message of error. Incorrect option selection: the display shows this message for some seconds if: –...
  • Page 7 Programme Maxi‐ Programme description Temperature range (Type of load and soil level) load Maxi‐ spin speed MIX 20° 2,5 kg Special programme for cotton, synthetic and mixed 20°C 1000 rpm fabrics lightly soiled. Select this programme to re‐ duce the energy consumption. Make sure that the detergent is suitable for low temperatures in order to have good washing results RINSE...

  • Page 8: Consumption Values

    Programme options compatibility Programme COTTON ■ ■ ■ ■ ■ COTTON+ PREWASH ■ ■ ■ ■ ■ ■ ■ ■ ■ COTTON ECO SYNTHETICS ■ ■ ■ ■ ■ DELICATE ■ ■ ■ ■ WOOL ■ ■ ■ MIX 20° ■...

  • Page 9: Options

    Programmes Load Energy Water Approxi‐ Remain‐ (kg) consump‐ consump‐ mate pro‐ ing mois‐ tion (kWh) tion (litre) gramme ture (%) duration (minutes) COTTON 1,16 60°C COTTON 0,61 40°C SYNTHETICS 0,45 40°C DELICATE 0,55 40°C WOOL 0,35 30°C Standard cotton programmes Standard 60°C cot‐...

  • Page 10: Settings

    RINSE HOLD The related indicator comes on. Select this option to reduce creasing: EXTRA RINSE • The washing programme ends with With this option you can add some rinses water in the drum. The drum turns to a washing programme. regularly to reduce creasing.
  • Page 11 2. Push the button A. 5. Close the drum and the lid. CAUTION! Before you close the lid of your appliance, make sure that you close the drum correctly. Detergent compartments. Using detergent and additives 1. Measure out specified detergents for washing machine the detergent and the fabric conditioner.
  • Page 12 1. Press the button DELAY START again 1. Press the button START/PAUSE to and again until the display shows the pause the appliance. delay you want to set. 2. Wait a couple of minutes and then you 2. Press the button START/PAUSE: can open a lid.

  • Page 13: Hints And Tips

    • Keep the lid ajar, to prevent the mildew 3. When the programme is completed, and odours. after a couple of minutes, you can The washing programme is completed, open the lid. but there is water in the drum: 4. Turn the programme knob to position •...

  • Page 14: Care And Cleaning

    • Use the correct products for the type your domestic system. Refer to "Water and colour of the fabric, the programme hardness". temperature and the level of soil. Water hardness • If your appliance does not have the detergent dispenser with the flap If the water hardness in your area is high device, add the liquid detergents with a or moderate, we recommend that you use...
  • Page 15 Cleaning the detergent dispenser Cleaning the inlet hose and the valve filter...

  • Page 16: Troubleshooting

    90˚ Frost precautions 4. Empty the drain pump. Refer to the emergency drain procedure. If the appliance is installed in an area 5. When the drain pump is empty, install where the temperature can be less than 0° the inlet hose again. C, remove the remaining water from the WARNING! Make sure that the inlet hose and the drain pump.
  • Page 17 Possible failures Problem Possible solution The programme does • Make sure that the mains plug is connected to the mains not start. socket. • Make sure that the appliance lid and drum doors are closed properly. • Make sure that there is not a damaged fuse in the fuse box. •...

  • Page 18: Technical Data

    Problem Possible solution You cannot open the ap‐ • Make sure that the washing programme is finished. pliance lid. • Set the drain or the spin programme if there is water in the drum. The appliance makes an • Make sure the levelling of the appliance is correct. Refer to unusual noise.

  • Page 19: Installation

    INSTALLATION WARNING! Refer to Safety chapters. Unpacking...
  • Page 20 Positioning Water supply 3/4” 1/2” 3/4” 3/4” Drainage min.600 mm max.1000 mm ENVIRONMENTAL CONCERNS not dispose of appliances marked with the Recycle materials with the symbol . Put symbol with the household waste. the packaging in relevant containers to Return the product to your local recycling recycle it.
  • Page 24 192935240-A-022018...

Table of Contents