Table of Contents
Advertisement
22
www.aeg.com
11.4 Liquid or powder
detergent
1
3
• Position A for powder detergent
(factory setting).
• Position B for liquid detergent.
When you use the liquid
detergent:
• Do not use gelatinous or
• Do not put more liquid
• Do not set the delay start
11.5 Setting a programme
1. Turn the programme knob. The
related programme indicator comes
on.
The indicator of button Start/Pauze
flashes with red colour.
The display shows the default
temperature, the spin speed and the
empty indicator bars of the available
functions.
2. To change the temperature and/or
the spin speed, press the related
buttons.
3. Set the available functions.
11.6 Starting a programme
without the delay start
Press button Start/Pauze to start the
programme.
CLICK
CLICK
thick liquid detergents.
then the maximum level.
function.
2
4
The relevant indicator stops to flash and
stays on.
On the display the indicator of the phase
is operation starts to flash.
The programme starts, the lid is locked.
The display show the indicator
The drain pump can operate
for a short time when the
appliance fills water.
11.7 Cycle time recalculation
After approximately 15
minutes from the start of the
programme:
• The appliance adjusts
automatically the cycle
time to the laundry you
have put in the drum to
have perfect washing
results in the minimum
necessary time.
• The display shows the
new time value.
11.8 Starting a programme
with the delay start
1. Press button Startuitstel again and
again until the display shows the
number of minutes or hours of delay.
The related indicator comes on.
A
B
.
Advertisement
Table of Contents
