Sony HT-A3000 Help Manual page 132

Help Guide
Sound Bar
HT-A3000
The Control for HDMI function does not work properly.
Check the connection with the speaker system.
Enable the Control for HDMI function on the TV. For details, refer to the operating instructions of your TV.
Wait a while, and then try again. If you unplug the speaker system, it will take a while before operations can be made.
Wait for 15 seconds or longer, and then try again.
Make sure the TV connected to the speaker system support the Control for HDMI function.
The type and number of devices that can be controlled by the Control for HDMI function are restricted by the HDMI
CEC standard as follows:
Recording devices (Blu-ray Disc recorder, DVD recorder, etc.): up to 3 devices
Playback devices (Blu-ray Disc player, DVD player, etc.): up to 3 devices (this speaker system uses one of them)
Tuner-related devices: up to 4 devices
Audio system (receiver/headphones): up to 1 device (used by this speaker system)
Related Topic
Connecting a TV Compatible with ARC/eARC
Connecting a TV That Is not Compatible with ARC/eARC
5-034-491-11(1) Copyright 2022 Sony Corporation
132