Selecting The Illumination Brightness; Selecting The Display Color (Only For Ux-J66V) - JVC UX-J55MDAH Instruction Manual

To enjoy the heavy sound (ONLY FOR UX-J66V)
You can enjoy the heavy sound. The function boosts low and
high frequency sounds—Sound Turbo.
Press SOUND TURBO.
• Each time you press the button, the Sound
Turbo is turned on and off alternately. When it
is turned on, the BASS indicator lights up on
the display.
When the Sound Turbo is on, the bass and the treble levels
are set to +2 (see page 10). After the Sound Turbo is
canceled, these levels restored to the previous levels.
To reinforce the surround effect (ONLY FOR UX-J66V)
You can reinforce the surround effect.
• This function does not affect your recording and playback
sound of monaural sources.
To get the effect, press SURROUND so that
the SURROUND indicator lights up on the
display.
To cancel the effect, press SURROUND again so that the
SURROUND indicator goes off.

Selecting the Illumination Brightness

You can change the illumination and display brightness only
while the unit is turned on.
On the remote control ONLY:
To change the brightness, press DIMMER.
• Each time you press the button, the illumination
and display dim (DIM ON) and brighten (DIM
OFF) alternately.
11
Selecting the Display Color
(ONLY FOR UX-J66V)
You can select the display color (COLOR 1 – COLOR 5 and
SOUND
TURBO
AUTO mode).
• AUTO mode changes the color (COLOR 1 to COLOR 5)
gradually.
To select the color, press COLOR.
• Each time you press the button, the color
BASS
changes as follows:
SURROUND
DIMMER
AUTO COLOR 1
COLOR 5 COLOR 4
COLOR
COLOR 2
COLOR 3