Using The Cd Player (Digital Audio Cds, Mp3 Discs) - JVC MX-K350V Instruction Manual

Using the CD Player (Digital Audio CDs, MP3 Discs)

Numeric
keys
4
CD1-CD3
REPEAT
PROGRAM
/RANDOM
The CD Player has the rotational disc tray that can accommodate
3 CDs. The unit can play back the following types of disc: Digital
Audio CD, MP3 disc, CD-R, CD-RW.
You can use Normal, Program, Random, or Repeat Play.
Normal Play: Can continuously play all the tracks on all
the CDs.
Program Play: Can play all the programmed tracks on all
the CDs in the programmed order.
Random Play: Can play all the tracks on all the CDs in ran-
dom order.
Repeat Play:
Can repeat all the tracks on all the CDs, the
tracks on one of the CDs, or just one of
tracks on one CD.
CAUTIONS:
• When you use Program Play or Random Play,
use only Audio CDs. Otherwise, the System
does not work properly.
If system error occurs, please recover it by turn-
ing off the power once or by changing the source
mode to others. Then,eject the tray and remove
the disc which is not supported.
• Some MP3 discs may not be properly played
back due to their disc format.
Here are the basic things you need to know to play CDs and locate
the different tracks on them.
11
CANCEL
SET
¢ CD 6
7
22
¡
CD 6
Track number, Playing time,
Program number, etc.
Play mode
indicator
* When the System is in use, the display shows other items as well.
For simplicity, we show here only the items described in this section.
FM CD TAPE
AUX
/ AM
EJECT
A
FULL - LOGIC CONTROL CD SYNCHRO RECORDING
PLAY
Disc indicators
1 2 3
PRGM REPEAT
RANDOM ALL 1CD
Repeat
indicator
About the Disc Indicator
Disc Number indicator
Selected Disc indicator
1
The Disc indicator consists of the following three kinds of indicators:
Disc Number indicator: Lights all the time.
Selected Disc indicator:Lights for the currently selected
Disc Rotation indicator:Runs when the selected CD is
4
7
CD Open/
Close 0
DISC SKIP
¢
CD1-CD3
EJECT
B
REC / PLAY
Disc Rotation indicator
disc number.
playing or paused. This indicator
goes out if a CD is not loaded for
the selected disc number.
Once the tray is ejected, the Disc
Rotation indicators for all disc
numbers are lit. However, when
the empty disc number is select-
ed, the Disc Rotation indicator for
the disc number goes out.