Jlip Player Software; Using Jlip Player Software Data - JVC GV-CB1EG Instructions Manual

34
EN

USING JLIP PLAYER SOFTWARE DATA

The GV-CB1 Video Capture Box can capture JLIP Player software data at an edit-in point
corresponding to a preset counter number.
File
New Album
Open Album
Save Album
Open JLIP (jlp) File
Save As JLIP (jlp) File
Save Image As...
Exit
Preparation
•Make sure all units are properly connected
•Insert the tape program edited with the
•If the data is stored on a floppy disk, load
1
Ctrl+S
2
Ctrl+A
3
4
5
6
7

JLIP PLAYER SOFTWARE

( p. 12).
Player Software into the video source unit.
disk into the floppy disk drive.
Open the menu bar and click "File" —
"Open JLIP (jlp) File".
•The "Open JLIP (jlp) File" window is
displayed.
Double-click the name of the desired
folder (directory) in the Select Directory
box.
•If the data is stored on a floppy disk,
enter the drive name.
Click on the file name to select it.
Click "OK".
•The computer monitor displays Scene
No., counter number at Edit-in Point,
and a blank image box.
Open the menu bar and click "Set-up" —
"Capture Mode" — "Automatic".
Select the data you want to transfer and
"Program Capture" and click "OK".
Click the "TRANSFER" button.
•The image data scanned by the video
source unit is automatically transferred
to your computer.