Tape Dubbing - JVC AA-V15EG Instruction Manual

TAPE DUBBING

PLAY/PAUSE
Power Switch
When connecting
the cables, open
the jack cover.
Audio and
Video cables
(provided)
(Recording deck)
To AUDIO and
VIDEO OUT
connectors
To AUDIO and
VIDEO IN
connectors
VCR
Tape Dubbing
CONNECT EQUIPMENT
1
Following the illustration to the left, connect the
camcorder and the VCR.
PREPARE FOR DUBBING
2
Set the camcorder's Power Switch to "PLAY", turn
on the VCR's power, and insert the appropriate
cassettes in the camcorder and the VCR.
SELECT VCR MODE
3
Engage the VCR's AUX and Record-Pause modes.
FIND EDIT-IN POINT
4
Engage the camcorder's Play mode to find a spot
just before the edit-in point. Once it's reached, press
PAUSE on the camcorder.
START EDITING
5
Press PLAY on the camcorder and engage the VCR's
Record mode.
STOP EDITING TEMPORARILY
6
Engage the VCR's Record-Pause mode and press
PAUSE on the camcorder.
EDIT MORE SEGMENTS
7
Repeat steps 4 through 6 for additional editing, then
stop the VCR and camcorder when finished.
37
EN