Table of Contents
Advertisement
service@apatioboss.com
PRE-OPERATING INSTRUCTIONS
ATTENTION:
1. Please read all inportant instructions before using your Patio Heater.
2. Make sure the unit is in the OFF position before plugging the heater into the outlet.
OPERATING INSTRUCTIONS
POWER:
Step 1：Plug the power cord into the outlet.
MODES：
Step 2：press rocker power switch on the rear of the heater to "▬" position and the
digital screen shows red light on.
Step 3：Press Mode Button once，the digital screen shows "P 1" which means 500W
power setting.
- 14 -
service@apatioboss.com
Step 4：Press Mode Button two times,the digital screen shows "P 2" which means
1000W power setting.
Step 5：Press Mode Button three times,the digital screen shows "P 3" which means
1500W power setting.
Step 6：Pressing the Mode Button once more puts the unit in Standby Mode again.
TIMER:
While the unit active , a timer can be set to turn the unit OFF after a desires amount of
hours.
Press the Timer Button to change the amount of hours before the unit will shut off. The
time will increase in 1 hour increments, up to 24 hours
WARNING:
The heater will remain hot for some time after it is turned off; handle with care.
- 15 -
Advertisement
Table of Contents
