Table of Contents
Advertisement
– Playback –
Playing back tape repeatedly (100 times)
— Repeat Play
During playback, press and hold PLAY (
5 seconds. The play indicator (
blinking slowly. To stop playback, press STOP (
or STOP/EJECT (
) on the VCR.
0
NOTE:
Pressing PLAY (
), REW (
4
3
repeat playback.
Locating beginning of recordings
— Index Search
Index codes are placed on the tape at the beginning of each
recording when recording on this VCR.
A
While the tape is not running, press
the Remote to start search.
B
To access a recording of 2 to 9 index
codes away, press
or
w
e
) repeatedly until the correct
6
number is displayed on the screen
(only if "SUPERIMPOSE" is set to
"ON"). Playback begins automatically
when the desired recording is located.
Beginning of the
current program
recorded
Previous
program
recorded
Locating beginning of timer recordings
— Instant Review
After ensuring that the VCR is turned off and that the timer mode
is disengaged, press REVIEW on the Remote.
● The VCR turns on, and rewinds to the index code indicating the
beginning of the last timer-recorded program, then begins
playback automatically.
● You can access a program of 2 to 9 index codes away from the
current position on the tape. If, for example, you have
5 programs recorded and you want to watch the third one, press
REVIEW three times.
● The Instant Review function will also operate if the VCR is
turned on.
Skipping unwanted portions
— Skip Search
Press 30 SEC
on the Remote once to 4 times during playback.
Each press initiates a 30-second period of high speed playback (up
to 2 minutes). When the specified portion of the tape is skipped,
normal playback resumes automatically. To return to normal
playback during Skip Search, press PLAY (
) for more than
4
) on the display panel starts
$
) on the Remote
8
), FF (
) or PAUSE (
) also stops
5
9
or
(
or
w
e
2
6
(
or
2
Current
Beginning of the
2nd next program
position on
the tape
recorded
Next
2nd next
program
recorded
).
4
Recording
Accidental erasure prevention
To prevent accidental recording on a
recorded cassette, remove its record
safety tab. To record on it later, cover
the hole with adhesive tape.
Basic Recording
A
Load a cassette
Make sure the record safety tab is intact. If not, cover the hole
with adhesive tape before inserting the cassette.
● The VCR turns on, and the counter is reset, automatically.
) on
B
Select recording channel
On the Remote
Press PR+/– or the Number keys.
On the VCR
Press PAUSE[CH]. The channel display on the
INDEX 1
display panel starts blinking. While the display is
blinking, press FF[CH+] or REW[CH–] to select
channel. After about 5 seconds, the channel display
stops blinking.
NOTES:
● You can select channel in the stop mode, recording pause mode
or during rewind/fast-forward high-speed search.
● If no cassette is loaded, or during recording pause mode, you
can select channel only by pressing FF[CH+] or REW[CH–].
● If you connect the TV and the VCR only using the RF
connection, press TV/VCR on the Remote so that the VCR mode
indicator lights on the display panel, to view the program to be
recorded.
C
Set tape speed
Press SP/EP (
p
D
Start recording
On the VCR, press REC (
(
), press PLAY (
7
During recording
Pause recording
Press PAUSE (
● Press PLAY (
● You can select channel in the recording pause mode.
Stop recording
Press STOP (
8
Remote.
).
). Or on the Remote, while holding REC
7
).
4
).
9
) to resume recording.
4
) on the
OR Press STOP/EJECT (
the VCR.
Record safety tab
) on
0
Advertisement
Table of Contents
