Getting Started - Electrolux ESI4007 Instruction Book

ENGLISH
Thank you for choosing an Electrolux product. In order to ensure the best results, always use original Electrolux
accessories and spare parts. They have been designed especially for your product. This product is designed with
the environment in mind. All plastic parts are marked for recycling purposes.
COMPONENTS
A. Soleplate
B. Maximum water level indicator
C. Filling aperture with cover
D. Spray nozzle
E. Spray button
F. Steam jet button
G. Steam selector/Self-cleaning
Picture page 2-3

GETTING STARTED

1
Remove all adhesive remains and gently rub with a dampened cloth. Rinse the water tank to
2
Filling the steam iron with water. Make sure that the plug is removed from the power outlet. Turn the steam
This product is appropriate for use with tap water. It is recommended to use destilled water or a mix of 50%
destilled, 50% tap water.
3
Plug the power cable into a power outlet. Turn the temperature selector to the desired heat. The power indica-
Note: If you lower the temperature during ironing, do not start again until the power indicator light turns on.
4
Iron with steam. Turn the steam selector to a position between "OFF" and "
steam required. To iron without steam, leave the steam selector on position "OFF".
Note:
iron vertically or turning the steam selector to "OFF".
5
Using the spray mist and steam jet function. Ensure that the water tank is at least 1/4 full. Use spray mist to
function, ensure that the tank is at least 1/2 full. Press the steam jet button several times to prime pump (B).
6
Steaming hanging items. The vertical steam jet function is ideal for steaming curtains, suits and delicate fabrics.
Hang the item on a hanger, hold the iron at a distance of 10–20 cm and press the steam jet button.
7
ply cord. Instead, grasp the plug and pull. Empty the water tank and let the iron cool completely before storage.
8
Always store the iron on its heel rest with the cord twisted loosley around the cable wrap facility.
To clean exterior surfaces, use a damp soft cloth and wipe dry. Do not use any chemical solvents, as these will
damage the surface.
9
Self-cleaning function.
steam button to self-cleaning position, hold for 60 seconds to empty water from the steam holes. Release the
button to stop the self-cleaning function.
10
Cleaning the soleplate. Do not use scouring pads or harsh cleaners on the soleplate as these will damage the
surface. To remove burnt residue, iron over a damp cloth while the iron is still hot. To clean the soleplate, simply
wipe with a soft damp cloth and wipe dry.
11
Your appliance is equipped with ThermoSafe™ hot soleplate indicator which detects when the soleplate is
hot by changing its colour from black to red. Once the temperature of the soleplate is <40C°, the colour changes
back to black to show that the iron is ready to be stored away.
www.electrolux.com
H. Power indicator light
I. Mains cable
J. Hot Soleplate Indicator *
K. Temperature selector
L. Water tank
M. Cable wrap facility
N. Iron heel
(* Certain models only)
", depending on the quantity of
Never pull the sup-
5