Table of Contents
Advertisement
3. Disassembly and Reassemble
Description & Screws
12
Remove the DC VSS-DRIVER BOARD.
•
Gently lift up (Top Left corner) to release the
lock.
•
Use both hands to hold the board and slide
to the left to release the board.
NOTE
When installing the DC VSS-DRIVER BOARD,
verify the board is properly positioned in all 4
mounting slots.
Locking
13
Completed the disassembly.
NOTE
Reassembly procedures are in the reverse order of disassembly procedures.
3-6
Locking
Fixing Hole
Picture Description
Slide to the left to release the board
Bottom chassis Guide Fixing Hole
Advertisement
Table of Contents
