Adding Names To The Translation Table - Samsung DCS 50si User Manual

Digital communications system
Hide thumbs Also See for DCS 50si:
Table of Contents

Advertisement

ADDING NAMES TO THE
TRANSLATION TABLE
This program allows the system administrator or technician to associate a CID
number received from the Central Office with a name programmed in this trans-
lation table. If there is no match between a received number and a name in this
table, [no CID name] will be displayed.
The translation table consists of 350 entries which each entry comprised of ten
digit telephone number and a 16 digit name.
Names are written using the keypad. Each press of a key will select a character.
Pressing the next key will move the cursor to the next position. For example, if
the directory name is "SAM SMITH", press the number"7" three times to get the
letter "S". Now press the number "2" once to get the letter "A". Continue selecting
characters from the table below to complete your message.
NOTE: When the character you want appears on the same dial pad key as the
previous character, press the VOL UP key to move the cursor to the right.
COUNT
1
2
DIAL 0
Q
Z
DIAL 1
space
?
DIAL 2
A
B
DIAL 3
D
E
DIAL 4
G
H
DIAL 5
J
K
DIAL 6
M
N
DIAL 7
P
R
DIAL 8
T
U
DIAL 9
W
X
DIAL ✱ ✱ ✱ ✱ ✱
:
=
Open customer programming and follow the instructions below.
30
3
4
5
.
)
0
,
!
1
C
@
2
F
#
3
I
$
4
L
%
5
O
^
6
S
&
7
✱ ✱ ✱ ✱ ✱
V
8
Y
(
9
✱ ✱ ✱ ✱ ✱
[
]
PROGRAM KEYS
UP & DOWN - Used to scroll through options.
KEYPAD - Used to enter selections.
SOFT KEYS - Move cursor left and right.
SPK - Used to store data and advance to next MMC.
HOLD - Used to clear previous entry.
ACTION
1. Press TRSF and then dial 728
Display shows first entry
2. Dial entry number (e.g., 005)
OR use UP and DOWN to scroll
through entries and press right
soft key to select entry
3. Enter telephone number and press
right soft key to advance to name entry
OR enter telephone number and press
left soft key to return to step 2 above
4. Enter associated name as described
above and press right or left soft key to
return to step 2 above
OR press SPK to save and advance
to next MMC OR press TRSF to
save and exit programming
DEFAULT DATA: NONE
DISPLAY
TRANSLATION:(001)
DIGIT:
TRANSLATION:(005)
DIGIT:_
TRANSLATION:(005)
DIGIT:3054264100
TRANSLATION:(005)
SAMSUNG TELECOM
31

Advertisement

Table of Contents
loading

Table of Contents