Adding Names To The Translation Table - Samsung iDCS 16 System Administration And Special Features Manual

SETTING INDIVIDUAL FORWARD NO
ANSWER TIMERS
Each station can have an individual Call Forward No Answer timer to accom-
modate station users with different individual work habits. When adjusting
this timer, take care that the value is not greater than the transfer recall timer.
The range is 001-255 seconds.
PROGRAM KEYS
KEYPAD - Used to set timer values.
UP & DOWN - Used to select extension number.
Speaker - Save data and advance to next program.
Open customer programming and follow the instructions below.
ACTION
1. Press TRSF and then dial 502
Display shows
2. Dial the station number (e.g., 205) OR
press UP or DOWN key to select the
station and press the right soft key OR
press Redial to select all stations
and press the right soft key
3. Enter the new value via the dial pad,
(e.g. 020), must be 3 digits) and the
system will return to step 2
4. Press Transfer to store and exit
programming OR press Speaker to store
and advance to the next program
DISPLAY
[201] NO ANS FWD
010 SEC
[205] NO ANS FWD
010 SEC
OR
[ALL] NO ANS FWD
010 SEC
[205] NO ANS FWD
010 SEC→020
30
ADDING NAMES TO THE
TRANSLATION TABLE
This program allows the system administrator or technician to associate a
CID number received from the Central Office with a name programmed in
this translation table. If there is no match between a received number and a
name in this table, [no CID name] will be displayed. The translation table
consists of 200 entries with each entry comprised of a 12 digit telephone
number and a 16 digit name. See Program Station Names.
Open customer programming and follow the instructions below.
PROGRAM KEYS
UP & DOWN - Used to scroll through options.
KEYPAD - Used to enter selections.
SOFT KEYS - Move cursor left and right.
SPK - Used to store data and advance to next MMC.
Hold - Used to clear previous entry.
ACTION
1. Press Transfer and then dial 728
Display shows first entry
2. Dial entry number (e.g., 005)
OR use UP and DOWN to scroll
through entries and press right
soft key to select entry
3. Enter telephone number and press
right soft key to advance to name entry
OR enter telephone number and press
left soft key to return to step 2 above
4. Enter the name using the method
in Program Station Names
and press right or left soft key to
return to step 2 above
OR press Speaker to save and advance
to next MMC OR press Transfer to
save and exit programming
DEFAULT DATA: NONE
31
DISPLAY
CID XLAT:(001)
DIGIT:
CID XLAT:(005)
DIGIT:_
CID XLAT:(005)
DIGIT:3054264100
CID XLAT:(005)
SAMSUNG TELECOM