Playing Back From Other Equipment; Receiving Fm Stations With Radio Data System - JVC SP-UXE15 Instructions Manual

3
Connect the System to the PC using a
USB cable (not supplied).
(rear panel)
USB cable
• Use "USB series A plug to B plug" cable.
4
The USB drivers are installed automati-
cally.
To play back sounds on the PC
Refer to the manuals supplied with the sound
reproducing application installed in the PC.
® ®
* Microsoft , Windows
Windows ® Me, Windows
XP are registered trademarks of Microsoft
corporation.

Playing Back from Other Equipment

To connect other equipment
By using a stereo mini plug cord (not supplied),
you can connect other equipment with analog
audio output jacks, such as an MD player, a TV,
etc.
Stereo mini plug cord (not supplied)
AUX
(front panel)
If the audio output on the other equipment is
not stereo mini plug type,
Use a plug adapter to convert the stereo mini
plug to the corresponding plug to the audio
output.
• Refer to the manuals supplied with the other
equipment.
✎
IMPORTANT
• Always set volume to "VOL MIN" when connecting
or disconnecting the other equipment.
PC
®
98, Windows 98SE,
® 2000 and Windows ®
Portable audio
device,
Game machine, etc.
To select other equipment for the source
USB
AUX
To adjust the sound input level
from other equipment
You can adjust the sound input level from the
connected equipment, if the incoming signal is
too small or too large.
1
Select AUX for the source.
2
Adjust the input level by holding down
SET until the input level appears on the
display.
• Each time you hold down SET, the dis-
play changes in the following order.
LEVEL 1
LEVEL 2
LEVEL 1: Ordinary input level (factory setting).
LEVEL 2: Increased input level.
Receiving FM Stations with Radio Data
System
Radio Data System allows FM stations to send
additional signals with their regular program
signals. For example, the stations send their
station names, and information about what type
of program they broadcast, such as sports or
music, etc. This unit can receive the following
types of Radio Data System signals:
PS (Program Service):
shows commonly known station names.
PTY (Program Type):
shows types of broadcast program.
RT (Radio Text):
shows text messages the station sends.
14