Playing Back From The Usb Memory Or Digital Audio Player - JVC SP-UXE15 Instructions Manual

To locate a particular portion
While playing a disc, press and hold until the
portion you want is reached.
Fast-reverses the track.
Fast-forwards the track.
To locate a track directly and
start play
Examples:
To select track number 5,
press 5.
To select track number 15,
> = 10
press
To select track number 20,
> = 10
press
To select track number 125
(for MP3/WMA only), press
> = 1
0
Playing Back from the USB Memory or
Digital Audio Player
This System is equipped with a USB MEMORY
terminal on the front panel. You can connect
your USB Memory or Digital Audio Player (DAP)
to this terminal and enjoy the sound out of your
USB Memory or DAP .
• Remember you cannot send any signal or data
to your PC from this System.
✎
IMPORTANT
• Always set volume to "VOL MIN" when connecting
or disconnecting the other equipment.
• Connect the USB Memory or DAP directly to the
front panel of the unit. Connecting via a USB hub
may result in malfunction.
• USB Memory and DAPs compatible with the USB
mass storage class specifi cations are connectable.
• Some DAPs are not compatible with the unit.
• Copyrighted tracks (WMA-DRM* tracks) cannot be
played on the unit.
• Coded or encrypted tracks in a special method
cannot be played on the unit.
* DRM (Digital Rights Management): Any of several
technical methods used to control or restrict the
use of digital media content on electronic devices
with such technologies installed.
Remote
ONLY
1 5.
2 0.
1 2 5.
To connect the USB Memory or DAP
Connect the DAP to the System using the USB
cable supplied with the DAP .
or
• Use a USB cable with a "series A" plug at the
System end.
• When disconnecting the USB Memory or DAP ,
make sure that playback is fi nished and that
the System is in the stop condition.
To play back sounds on the
USB Memory or DAP
To start
• The USB MEMORY lamp on the left of the
USB MEMORY terminal fl ashes while USB
MEMORY is selected for the source.
To select a track/group*
Decrease the track/group* numbers.
Increase the track/group* numbers.
* For details about the group selection, see "For
MP3/WMA playback" on page 13.
To stop
12