Audio Setting; Input Configuration - JVC GM-H40L1G/E Instructions Manual

AUDIO SETTING

Item
SPEAKER SELECT
MUTING
AUDIO
AUDIO L ch.
AUDIO R ch.
LEVEL METER SETTING
LEVEL METER ch
BAR TYPE
BAR BRIGHTNESS
REFERENCE LEVEL
OVER LEVEL
reset
reset

INPUT CONFIGURATION

Item
QUICK CHANGE
INPUT B
INPUT A
INPUT C/D/E/F
Example of the level meter display —Level indication and audio channels
Ex.: When "LEVEL METER ch" is set to "1–8" and "BAR TYPE" is set to "3COLORS. "
NOTE
• When "BAR TYPE" is set to "W.100" or "W.50," the standard input level set in the
"REFERENCE LEVEL" is displayed with the line indication. Input level set in "OVER
LEVEL" is not displayed.
• The audio channel bar with no signal input is displayed in white for the "3COLORS"
setting, and in gray for other settings.
To do
Selects the speakers you want to use.
Turns the volume on or off .
Changes the audio mode.
Selects the left audio channel when the EMBEDDED AUDIO signal
is being input.
Selects the right audio channel when the EMBEDDED AUDIO
signal is being input.
Adjusts the audio level meter display for the EMBEDDED AUDIO signal when the HD/SD SDI or
SDI input card (option) is inserted (see "Example of the level meter display" below).
Selects the audio channels used in the audio level meter
display. (The numbers indicate the audio channel. The
input level for the channels indicated on the left side of ":" is
displayed on the left side of the screen, and the input level for
the channels indicated on the right side of ":" is displayed on
the right side of the screen.)
Selects the color of the audio level meter display.
Selects the brightness of the audio level meter display.
Sets the standard input level.
Sets the input level's lower limit indicated in red for the
"3COLORS" display.
Restores the default setting for "LEVEL METER SETTING. "
Restores the default setting for all the items in "AUDIO SETTING. "
To do
Sets if you want to change Inputs A and B quickly.
Selects the terminal and signal type you want to use for Input B.
Displays the terminal being used for Input A ("VIDEO (BNC)" or
"VIDEO (Y/C)").
Shows the status of the input card slots. When no input card is
inserted, "NO CARD" appears.
Setting value
INT. (Internal speakers),
EXT. (External speakers)
ON, OFF
STEREO, MONO
1ch += 8ch
1ch += 8ch
OFF, 1:2, 12:34, 31:24,
123:456, 1–8
3COLORS (3 colors to
indicate variations in input
levels), W.100 (white), W.50
(half transparent)
HIGH, LOW
–20dB, –18dB
–10dB, –8dB, –6dB, –4dB,
–2dB
Setting value
OFF, INPUT A&B
ANALOG RGB, DVI,
COMPONENT
—
—
Red
OVER LEVEL
Yellow
Green
REFERENCE
LEVEL
Audio channels
23