JVC RX-D411SB Instructions Manual page 74

Do not connect the AC power cord until all other connections have been made.
Turn off all components before making connections.
• When you connect the components, refer also to their manuals.
Connecting a VCR:
NOTES
• Select the audio and video input settings according to the connection method. See page 21 for
details.
• When connecting a VCR to the COMPONENT VIDEO jacks, select "VCR" for the COMPONENT
select setting (see page 34); otherwise, the following occurs:
– You cannot view the playback picture on the TV.
– The AV COMPU LINK remote control system (see pages 45 and 46) cannot operate properly.
• You can enjoy digital audio if using a digital coaxial or optical cable. When shipped from the
factory, the digital optical terminal—DIGITAL IN 3(VCR) on the rear of the receiver is set for a
VCR. For details of the digital audio connection, see page 14.
Connecting a SIRIUS Satellite Radio
NOTES
• To connect KT-SR2000 (JVC SIRIUS Satellite Radio) to this receiver, it is required to separately purchase KS-K6013 Home Docking Kit.
• You cannot use a digital audio cable (coaxial or optical) to connect a SIRIUS Satellite Radio to this receiver.
• After connecting a SIRIUS Satellite Radio to the TV/SIRIUS IN jacks, change the source name to "SIRIUS." See page 20 for details.
12
Green
Blue
Red
White
Red
Red
White
S-video cable (not supplied)
Composite video cable (not supplied)
White
Red
Stereo audio cable (not supplied)
Component video cable (not supplied)
Stereo audio cable
(not supplied)
Composite video cable
(not supplied)
Å To component video output
• Connect Y, P
ı To left/right audio channel output
Ç To left/right audio channel input
Î To composite video output
‰ To S-video output
Ï To S-video input
Ì To composite video input
SIRIUS Satellite Radio
: signal flow
VCR
, and P correctly.
B R