Table of Contents
Advertisement
WARNING: AVOID INJURY. Read and
understand the entire Safety section before
proceeding.
IMPORTANT: NEVER spray unit with high-pressure
water. DO NOT store unit outdoors.
NOTE: If needed, the cloth bags can be washed with low
pressure water.
PROBLEM
Bagger fails to pick up
grass or leaves.
Blower Assembly stops
or slows.
SPECIFICATIONS
Model Number
Description
Added Length to Unit
Bagger Capacity
Added Width to Mower
Deck
TROUBLESHOOTING
PROBABLE CAUSE
1. The mesh bags are full.
2. Bagger is clogged.
1. Worn or damaged V-belt.
891006
Bagger, Rear 2-Bag
25.50"
8 Bushels
12 inches
STORAGE
Clean plastic surfaces with sponge and mild detergent.
Dry with a soft cloth.
Remove all debris from mesh bags before storing.
Remove all dirt, grease, leaves, etc. from unit.
Store in a clean, dry area.
Ensure all fasteners are properly tightened. Inspect
moving parts for damage and wear.
Touch up all rusted or chipped painted surfaces.
CORRECTION
1. Shut off engine, remove key, and empty
mesh bags.
2. See Unclogging Bagger on page 13.
1. See Replacing V-Belt (Figure 15) on
page 14.
15
Advertisement
Table of Contents
